Plus, 15% off all new parts with any complete overhaul package.

Complete Overhaul
Now $220  Was $275

  • Compete disassembly of the bike down to the bare frame
  • Headset, hub and bottom bracket overhaul
  • Full detail cleaning
  • FREE installation of any new part
    (Suspension component installation extra)

Complete Overhaul with Suspension Fork Overhaul
Now $264  Was $330

Same as above but with a fork overhaul, seals not included.

Complete Overhaul with Suspension Fork and Frame Shock
Now $288  Was $365

Same as above but with rear shock overhaul and single pivot frame overhaul. Additional bearings can changed as needed for the discounted rate of $16 each.

The Whole Enchilada
Now $400  Was $500

Same as above plus disc brake bleeds and suspension bearing/bushing replacement.

20% Off Expert Tune-Up
A complete performance tune-up for all bikes

Now $124  Was $155

  • Measure chain and inspect chainring & cassette
  • Removal and detailed cleaning of all drivetrain components
  • Precision wheel truing & hub adjustments
  • Brake, shifter & derailleur adjustments
  • Bottom bracket adjustment
  • Headset adjustment
  • Full lubrication service
  • Check to ensure all accessories are properly installed and functioning
  • Free installation of cables and housing (parts not included; internally routed cable surcharge may apply)
  • Free installation of handlebar tape or grips (parts not included)
  • Bike wipedown

Plus, any one component installed for free.

20% Off Any Suspension Service
*In-house work only

Suspension Frame Overhaul:

The sophisticated equipment on these bikes will always require regular maintenance. Many times a good cleaning and reinstallation of bushings will do the trick, but bearing replacements are occasionally necessary. Dirty or worn suspension links will cause noise, lateral play, and lead to damaged hardware. For quick turn-around times, we stock bearing kits for many of the bikes we sell.

Fork & Rear Shock Service:

Suspension forks and rear shocks require periodic maintenance to ensure safety. Component manufacturers recommend oil changes and bushing inspections as often as every 25 hours ride time. Even under dry conditions, dust seals can become contaminated and damper oil will break down and cause handling issues. An annual overhaul of these components will ensure they remain safe and reliable.


Five Locations Serving Austin
517 S. Lamar Blvd - 512-477-3472
10947 Research Blvd - 512-345-7460
9900 W. Parmer Lane - 512-637-6890
12005 Bee Cave Rd - 512-634-8844
3202 Guadalupe St. - 512-267-3495

Austin Independent Business Alliance MemberLeague of American Bicyclists– Bicycle Friendly Business Award

Copyright © 2012 Bicycle Sport Shop. All Rights Reserved.